Filter
Top Products
1.
Press and
hold the SHFT/CLR button.
2.
Use the VOLUME s or t buttons to adjust the squelch. Pressing the
VOLUME s will open the squelch and pressing the VOLUME t will
close the squelch.
SENDING A SPECIAL CALL
SCAN Model Radio
1.
Press the SPC key to put the radio into Special Call mode and provide
access to a preprogrammed special call list. Each selection from the
list is preprogrammed with either an individual number or an intercon-
nect number. The SYStem field will display "SP" and the GRP (Group)
field will display the current selection number from the special call list.
The "S" and "PC" icons will also be illuminated while in the Special
Call mode.
2.
Press the SELECT s or t buttons to increment or decrement through
the special call list.
3.
Individual - Once the desired individual special call number is displayed
in the GRP (Group) field, press and hold the PTT to initiate the call.
The radio performs the necessary signalling required to obtain a
working channel.
Interconnect - Once the desired interconnect special call number is
displayed in the GRP (Group) field, press and release the PTT to initiate
the call. The radio performs the necessary signalling required to obtain
a working channel.
4.
Individual - When the signalling is successfully completed the "TX" and
"BSY" flags turn on and the Call Originate tone sounds. Speak directly
into the microphone. Release the PTT bar as soon as you stop talking
and wait for a reply.
To display the last four digits of the individual or interconnect
number currently selected, press and hold the SHFT/CLR button
and then press the SPC key.
NOTE
29