Filter
Top Products
S
The Select buttons are two momentary (auto ramp-
ing) switches used to increment or decrement the
current Group/Channel selection. Pressing the
shift button and then the S buttons will increment or
decrement the System selection. The Select but-
tons are also used to increment or decrement the
Special Call selection while in the Special Call
mode.
V
The Volume buttons are two momentary (auto
ramping switches) used to increment or decrement
the volume level from the speaker. A tone sounds
each time the Volume buttons are pressed, except
when a call is in process.
HOME/E
The HOME/Emergency key is used to automat-
ically select a desired Group and/or System by
pressing and holding the key for a programmed
duration. The HOME/Emergency key is also used
to declare emergencies by pressing and holding the
key for a preprogrammed duration. Emergency
messages may only be issued on EDACS systems.
SPC
Pressing the SPC (Special) key will put the radio in
the Special Call mode. From the Special Call mode
the radio is able to make individual and interconnect
calls. This key is active with trunked systems only.
SCAN-A/D
The SCAN-Add/Delete key is used to enable the
Scan mode and to add or delete Groups/Channels
to the scan list.
STO
The
STOre key in combination with the SHIFT/CLR
button is used to store individual call numbers and
interconnect calls. This key is available on System
Model radios and is active with trunked systems
only.
10