Filter
Top Products
85
Audio/Video
Aspect ratio: The aspect ratio can be adjusted to match the capture settings
of your video clips.
Display mode: Interlace is the
default setting. Progressive
scan should only be selected if
your television or monitor
supports this feature.
Video Output: You can select
the video output from this screen
or by pressing the VIDEO OUT
button on the remote control
from any screen.
The Composite setting should be selected for composite or S-Video
connections. If component connectors are used but not selected, the screen
will have a blue tint.
Audio Output: The audio output can be modified from this screen or by pressing
the AUDIO OUT button on the remote control from any screen.
If you are playing audio that has been encoded in 5.1 surround then sound is in
pass-through mode. This means that you cannot adjust the volume on the
remote control or Mute the sound using the remote control. With 5.1 surround
audio you must control the volume level from your digital tuner/receiver.
Setup (continued)
General
The General option contains a submenu of four options: