Filter
Top Products
57
3. Scroll down and press ENTER to
select Video Seek Mode. There are
two options: FF/Rev and Jump.
FF/Rev is the default setting. With
Jump, you can “jump” to the time you
select within the video. In this window,
FF/Rev is selected for the Video Seek
Mode.
Video (continued)
Please select the Video Seek Mode
before viewing your video. Once you
make this selection, it will apply to all
subsequent viewings, until it is
changed. You cannot change the
setting during video viewing.
How to use the ‘Search Video by Time’ feature
4. Jump is selected here in Video Seek
Mode. In the next few pages we will
explain the Jump setting.
1. Select SETUP on the remote control
unit. Scroll down and select
General.
In addition to a FF/RWD option (the
default mode), your media player also
allows you to search a video for a
particular time frame. This option is
called Jump in the Setup menu. If you
want to use the Jump mode, you will
need to change the setting of the Video
Seek Mode before you view the video.
To set your Video Seek Mode, please
follow the steps below before viewing the
video:
2. Scroll down and press ENTER to
select Audio/Video.