Filter
Top Products
MANUAL V2.0
5 & 7
MAIN SETTINGS > P. 54
If you use the optional DVR Station to schedule video recordings on your TV
system, make sure that the time and date are set correctly!
“Display on Standby”
“Enabled”: when your device is externally pow-
ered and the screen backlight shuts off, then
tapping the touchscreen or pressing a button will
display the current time as well as the time set
for the alarm clock (bottom right). After a few
seconds, the backlight will shut off again.
-
While the time is being displayed, tapping the touchscreen or pressing a button
again will bring you to the ARCHOS Home Screen.
“Time Format”
choose between 12h or 24h mode.
“Time setting”
“Automatic”: select this parameter if you want to set the clock automatically
when your ARCHOS is connected to a WiFi network. You will need to select your
location in the “Language and Region” settings screen (see:
“Language and
Region” Settings
).
“Manual”: select this parameter to set the current date & time manually. The fol-
lowing parameters will appear: “Hour”, “Minute”, “Year”, “Month” and “Day”.
“Synchronize now”
if the “Time setting” parameter is set to “Automatic”, use this button to set the
clock automatically via the WiFi.
for this to work, the ARCHOS needs to be connected to a WiFi network.
ATTENTION: If the time & date are not correctly set, you might not be able to
access certain web pages.
“Hour”, “Minute”, “Year”, “Month”, “Day”
these parameters allow you to set the current time and date manually.
-
-
-
-
-
-
-