A SERVICE OF

logo

7-11SDC755A
7 • Maintenance
4. Clean the brush in plain water, and rinse thoroughly.
5. Position the brush as shown so its
bottom edge is under the mounting
tabs.
6. Slide the brush back towards the
rear of the moistener.
7. If you need to clean the wick and holder, continue with Removing
the Holder and Wick procedure on the next page. Otherwise,
push down on the blue release lever on the moistener.
CLICK!
Release
Lever
8. Slide the moistener back onto the machine. You should hear a
click as it engages.
Removing the Moistener Brush (continued)