6-9SDC755A
6 • System Options
Changes to the Lock Code and Password
Setting the Lock Code
The Lock Code prevents unauthorised access to your mailing system
after the machine has entered sleep mode or it is in a "soft" power-
down mode (by pressing the Lock/Power key on upper right corner of
the control panel).
1. Press Options.
2. Select "Setup".
3. Select "LockCode/Password".
4. Select "Enable Lock Code".
5. At the prompt, type in a new lock code (4 digits) and select "OK".
6. Re-enter the new lock code again to confirm and select "OK".
7. At the "Lock Code enabled" message, select "OK".
8. Press Home to return to home menu.
Disabling the Lock Code
1. Press Options.
2. Select "Setup".
3. Select "LockCode/Password".
4. Select "Disable Lock Code".
5. When prompted, enter the current Lock Code and select “OK”.
6. Press Home to return to the home menu.
IMPORTANT INFORMATION
Your DM300c/DM400c mailing machine contains postal funds
and if you opt to use the 4-digit Lock Code to secure the funds,
it is important that you do not allow your Lock Code to be
compromised if the machine is used in an open area. If you
believe your Lock Code has been compromised, it should be
changed immediately. Alternatively, you may wish to consider
locking the machine in a secure area.
