3-2 SDC755A
3 • Running Mail
Before You Begin
Before you run mail on your system, review the Checklist, Home
Screen, and Selecting Postage sections below and on the next page.
Checklist
• Make sure your mailing system is plugged into a properly
grounded power receptacle. Always follow the safety precautions
in Chapter 1, Introduction.
• Check the level of sealing solution in the moistener. If you need
to add sealing solution, refer to Chapter 7, Maintenance.
• If you plan on printing tape sheets, make sure you've got an
adequate supply. See Chapter 9, Supplies and Options for
ordering tape sheets.
• Check that you have enough postage for your mail run. Press
Funds key to view your current balance.
Home Screen
When you power up your system, the Home screen appears on the
operating display. If your system has been set up to require a lock
code or password, you are prompted to enter it.
A typical Home screen is shown below (your screen may vary
dependant on options selected):
• To enter postage at the Home screen, and you know the postage
amount you want to print, simply key in the amount using the
keyboard.
• Use Page Down and Page Up keys to scroll through menu
features. If the key is lit, additional choices are available.
• If you would like to print ads/text messages on your mail or
access other print options, press Page Down to view these
features.
(The Up/Down arrow
keys light up in
green when there
are additional menu
options)
Key In Postage ≡0.00≡
18.10.06
◄Account : Select Account
◄Class : None
◄Ad : None
◄Text Msg : None
