A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 91
step <letter>
Changes to the command level for EventTrak Task Step
configuration.
task <number>
Changes to the command level for EventTrak Task confi-
guration.
write
Stores the current configuration in permanent memory.
tcp (config-tcp) level commands
ack limit <packets>
Sets the number of packets that must be received before
an ACK is forced.
auto show stats
Continuously shows TCP statistics
clear counters
Zeros TCP counters
clrscrn
Clears the screen.
default ack limit
Restores the default ack limit of 3 packets.
default send data
Sets TCP to send data in accordance with standards.
exit
Exits to the configuration level.
no clear counters
Unzeros TCP counters
resets disable Does not send TCP RSTs upon connection to unused
ports.
resets enable
Sends TCP RSTs upon connection to unused ports.
send data expedited
Sets TCP to send data whenever the window is sufficient-
ly open, for improved
send data standard
Sets TCP to send data in accordance with standards.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show stats
Shows TCP statistics
write
Stores the current configuration in permanent memory.
terminal 1 (config-terminal:1) level commands
break duration <milliseconds>
Sets how long a break should last when it is being sent to
the line.
clrscrn
Clears the screen.
default break duration
Restores the break duration to the default value (500 ms).
default terminal type
Sets the default terminal type, "UNKNOWN".
echo disable
Disables echoing of characters received on the line back
to the line.
echo enable Enables echoing of characters received on the line back
to the line.
exit
Exits to the configuration level.
exit connect menu disable
On the login connect menu, removes the menu item allow-
ing the user to exit
exit connect menu enable
On the login connect menu, inserts the menu item allow-
ing the user to exit
line <line>
Enters the line level.
login connect menu disable
Disables the login connect menu, so a user will get the
CLI immediately
login connect menu enable Enables the login connect menu, so a user will get the
menu rather than the
lpd <line>
Enters the configure lpd level.
no send break
Removes the configured send break character.
preview connect menu
Shows the layout of the connect menu with current set-