5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 57
Changes to the command level for EventTrak configura-
tion.
Exits to the enable level.
Change to config host level
Changes to the command level for ICMP configuration
and status.
Changes to the interface configuration level.
Changes to the command level for IP configuration and
status.
Enters the config-filter level.
Kills SSH session with index from "show sessions"
Kills Telnet session with index from "show sessions"
Enters the configure lpd level.
Changes to the modbus configuration level.
Enters the query port level.
Change to menu level for RSS configuration and status
Displays system information.
Displays the last 20 commands entered during the current
CLI session.
tcp Changes to the command level for TCP configuration and
Enters the configure-terminal level.
Enters the configure-terminal level for the network.
udp
Changes to the command level for UDP configuration and
status.
Stores the current configuration in permanent memory.
connect (tunnel-connect:2) level commands
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
aes encrypt key text <text>
Sets the connect tunnel AES encrypt key with up to 16
Forwards (tunnels) network data in connect mode tunne-
ling.
Discards all data coming in from the connect mode tunnel
before forwarding
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
Enables the tunneling server to always establish tunneling
