5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 67
Sets the maximum timeout the HTTP server waits when
receiving a request.
Restores the HTTP counters to the aggregate values.
Sets the port number the HTTP server will use.
Disables the HTTP server.
Displays the HTTP server settings.
Displays the HTTP server authentication settings.
Displays the last 20 commands entered during the current
CLI session.
Displays the HTTP server log.
Displays the HTTP statistics.
Sets the port number the HTTP server will use over SSL.
Disables TLSv1.0 handling.
Enables TLSv1.0 handling.
Disables TLSv1.1 handling.
Enables TLSv1.1 handling.
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
Continuously shows ICMP statistics
Exits to the configuration level.
Displays the current configuration.
show history Displays the last 20 commands entered during
Prevents ICMP packets from being sent or received.
Allows ICMP packets to be sent and received.
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
Removes an entry from the DNS Cache
default gateway <IP address>
Sets the configurable gateway IP address to the default
value.
dhcp client id binary <binary>
Sets the client id allowing binary characters.
<text>
Sets the client id in text format.
