5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 74
Stores the current configuration in permanent memory.
lpd 2 (config-lpd:2) level commands
Disables printing banner for all print jobs. Only print the
banner when a
Enables printing banner for all print jobs.
Treats print job as ascii text. Filters out all non-ascii cha-
racters and
binary enable Treats print job as binary. Sends data byte-for-byte to the
Redirects serial output back to the line.
Redirects serial output from the line to this CLI session.
convert newline disable Disables converting single new line and carriage return
Enables converting single new line and carriage return
characters to
Disables sending the end-of-job string after each print job.
Enables sending the end-of-job string after each print job.
Sets the end-of-job text allowing for binary characters.
Sets the end-of-job text.
Exits to the configuration level.
Disables the printer from advancing to the next page at
the end of each
Forces the printer to advance to the next page at the end
of each print job.
Ends the current print job on this lpd line.
<line>
<line>
Enters the configure lpd level.
Removes the end-of-job string.
Removes the start-of-job string.
Sets the name of the queue that this lpd line belongs to.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays statistics and status information for this lpd line.
soj disable Disables sending the start-of-job string after each print
Enables sending the start-of-job string after each print job.
Sets the start-of-job text allowing for binary characters.
Sets the start-of-job text.
Enters the configure-terminal level.
Enters the configure-terminal level for the network.
<number of lines>
Prints lines of text directly to the lpd line.
Stores the current configuration in permanent memory.
match 1 (config-eventtrak-match:2.1) level commands
Sets EventTrak monitoring to be insensitive to case, so
