A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 76
string set <text>
Sets the EventTrak monitoring match string.
task <number>
Changes to the command level for EventTrak Task confi-
guration.
timeout milliseconds <number>
Sets the EventTrak monitoring timeout milliseconds. Old
data that might
wildcard <text>
Sets the EventTrak monitoring wildcard character. Where
it is placed in the
write
Stores the current configuration in permanent memory.
match 2 (config-eventtrak-match:2.2) level commands
case sensitive no
Sets EventTrak monitoring to be insensitive to case, so
either a or A will
case sensitive yes
Sets EventTrak monitoring to be case sensitive, requiring
an exact match.
clrscrn
Clears the screen.
default case sensitive
Sets the default EventTrak monitoring case sensitivity,
which is not case
default timeout milliseconds
Restores the default EventTrak monitoring timeout.
exit
Exits to the EventTrak level.
match <number>
Changes to the command level for EventTrak Match con-
figuration.
no string
Removes the EventTrak monitoring match string.
no wildcard
Removes the EventTrak wildcard character.
rss trace matches disable
Turns off RSS tracing of EventTrak string matches.
rss trace matches enable Turns on RSS tracing to post each time EventTrak
matches the string.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
string binary <binary>
Sets the EventTrak monitoring match string allowing for
binary characters.
string set
<text>
Sets the EventTrak monitoring match string.
task
<number>
Changes to the command level for EventTrak Task confi-
guration.
timeout milliseconds <number>
Sets the EventTrak monitoring timeout milliseconds. Old
data that might
wildcard <text>
Sets the EventTrak monitoring wildcard character. Where
it is placed in the
write
Stores the current configuration in permanent memory.
match 2 (config-eventtrak-match:1.2) level commands
case sensitive no
Sets EventTrak monitoring to be insensitive to case, so
either a or A will
case sensitive yes Sets EventTrak monitoring to be case sensitive, requiring
an exact match.
clrscrn
Clears the screen.
default case sensitive
Sets the default EventTrak monitoring case sensitivity,
which is not case
default timeout milliseconds
Restores the default EventTrak monitoring timeout.
exit
Exits to the EventTrak level.
match <number>
Changes to the command level for EventTrak Match con-
figuration.