A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 83
show ibio2100
Show system information
trace route <host>
Trace route to destination
rss (config-rss) level commands
clear rss
Clear the RSS Feed data
clrscrn
Clears the screen.
default max entries
Restores the default number of RSS feed entries.
exit
Exits to the configuration level.
feed disable
Disables RSS feed.
feed enable
Enables RSS feed.
max entries <number>
Sets the maximum number of RSS feed entries.
persist disable
Disables RSS feed data persistence.
persist enable
Enables RSS feed data persistence.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Display the RSS Feed status
write
Stores the current configuration in permanent memory.
serial (tunnel-serial:2) level commands
buffer size <bytes>
Sets the size of the buffer for data read from the serial
port.
clrscrn
Clears the screen.
default buffer size
Restores the default buffer size.
default dtr
Restores default DTR control, asserted while connected.
dtr asserted while connected Asserts DTR whenever a connect or accept mode tunnel
connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
serial (tunnel-serial:1) level commands
buffer size <bytes>
Sets the size of the buffer for data read from the serial
port.
clrscrn
Clears the screen.
default buffer size
Restores the default buffer size.
default dtr
Restores default DTR control, asserted while connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode tunnel
connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
snmp (config-snmp) level commands