75
V5.1‐March2010
MAINTIMEBASEMODE
The time base mode menu is explained as the following table.
Function menu Setting Explanation
Main Time Base Horizontal main time base
Zone Window Use the two cursors to define a zoom window area
Window Full-screen display
To zoom in on a small area of the display, perform the following steps:
1. Press MENU to view the function menu on the right side of the screen.
2. Press MENU ▲ or MENU ▼ to select the TIME MODE. Three (3) selectable options
will then appear at the bottom of the display.
3. Use the Soft-keys F1, F2, and F3 to select the Main Time Base, Zone Window, or
Window functions as described in the Table above.
4. Use the OPTION key and the◄
(yellow) and ► (yellow) keys to adjust and vary
the Time Base and size of the window zoom.
Refer to Figures 47 and 48.
Figure 47: Original Window Setting
