A SERVICE OF

logo

55
V5.1‐March2010
options will then appear at the bottom of the screen
3. Press the F1 key to select the frequency measurement of CH1. The measurement
window will appear red in color and show the frequency of CH1
4. Press the MENU or MENU key to select MEAS SET 2. Five (5) selectable
options will then appear at the bottom of the screen
5. Press the F4 key to select the peak-to-peak value of CH2. The measurement
window will appear blue in color and show the peak-to-peak value of CH2
Figure 31: Automatic Measurements
Autoscale
Autoscale enables the instrument to automatically configure the trigger
mode, voltage division and time scale according to the type, amplitude and
frequency of a signal.
The menu is as follows:
Function Menu Setting Instruction
Autoscale
OFF
ON
Turn OFF Autoscale
Turn ON Autoscale
Mode Vertical Adjust vertical scale without