53
V5.1‐March2010
AUTOMATICRANGINGMEASUREMENTS
The oscilloscope can perform twenty (20) automatic measurements: Frequency,
cycle, average, peak-to-peak, root mean square, Vmax, Vmin, Vtop, Vbase, Vamp,
overshoot, pre-shoot, rise time, fall time, +width, -width, +duty, -duty, delayA
B
and delayA
B . Two measurement results can be displayed simultaneously on the
screen. The function menu for automatic measurements is described in the following
Table.
Function menu Settings
Description
Freq
CH1
CH2
Measure the frequency of CH1
Measure the frequency of CH2
Period
CH1
CH2
Measure the period of CH1
Measure the period of CH2
Mean
CH1
CH2
Measure the average value of CH1
Measure the average value of CH2
Peak-Peak
CH1
CH2
Measure the peak-to-peak value of CH1
Measure the peak-to-peak value of CH2
Cyc RMS
CH1
CH2
Measure Root Mean Square (RMS) value of CH1
Measure Root Mean Square (RMS) value of CH2
Vmax
CH1
CH2
Measure the Vmax of CH1
Measure the Vmax of CH2
Vmin
CH1
CH2
Measure the Vmin of CH1
Measure the Vmin of CH2
Vtop
CH1
CH2
Measure the Vtop of CH1
Measure the Vtop of CH2
Vbase
CH1
CH2
Measure the Vbase of CH1
Measure the Vbase of CH2
Vamp
CH1
CH2
Measure the Vamp of CH1
Measure the Vamp of CH2
