A SERVICE OF

logo

28
V5.1‐March2010
5. Press(yellow) or (yellow) to adjust the vertical display position of waveform M.
Press
(yellow) or (yellow) to adjust the display time factor for waveform M.
Refer to Figure 18.
Figure 18: Waveform Mathematical Calculations
USBMASSSTORAGEDEVICE/SAVEWAVEFORMDATA
Connect a USB mass storage device to the USB port on the meter using the supplied
cable. Press the COPY key. The current waveform data will then be saved (the file
names are automatically sequenced (WAVE1.bin, WAVE2.bin, etc.). Now connect
the USB Mass Storage device to a Personal Computer and use the supplied software
to transfer and manipulate the stored data.
Note: Refer to the HELP utility in the supplied software for further instructions.