3
Options
3-5
6. Secure the printer to the cassette unit with the screws that
come with the cassette unit. Install three of the screws at the
locations noted below.
7. Reconnect any interface cable you removed.
8. Make sure the printer’s power switch is turned off, then plug
the power cord into the printer and into an electrical outlet.
9. Turn on the printer.
To confirm that the lower paper cassette is installed correctly,
print a status sheet by pressing the control button. The lower
paper cassette will be listed on the status sheet as one of the
available options. If the cassette is not listed on the status sheet,
try reinstalling it.
Be sure to select the paper source in your application program.
Since the section method varies from application to application,
see your software documentation for more information.
Installing two paper cassette units
This section explains how to mount a 250-sheets paper cassette
unit and a 500-sheets paper cassette unit onto the printer.
Note:
When mounting both a 250-sheets paper cassette unit and a 500-sheets
paper cassette unit onto the printer, ensure that the 500-sheets paper
cassette unit is located at the bottom.
Three areas for tightening
