5-36
SelecType
EPSON GL/2 Mode
Note:
You cannot change the GL/2 Mode items by SelecType. To change these
items, use the GL/2 command listed in Appendix C.
In EPSON GL/2 mode, you can use your printer with plotter
applications. This mode is similar to the GL/2 mode supported
in HP LaserJet 4 mode. EPSON GL/2 mode emulates some of the
HP-GL plotter commands and includes all of the commands
found in HP’s GL/2 mode, plus two additional commands.
GLMode
Selects whether the emulation is similar to the GL/2 or the HP
LaserJet 4 emulation of the GL/2.
Scale
Selects whether the output from the software is scaled, and if so,
how the scale factor is calculated: cased on the output paper size
of the software application.
Origin
Selects whether the logical origin of the “plotter” is from the
corner or the center of the paper.
Pen
Selects the logical “pen” which is used to “plot” the drawing.
End
Selects the way in which lines end.
Join
Selects the way in which lines are joined.
