6-14
Troubleshooting and Maintenance
Status and Error Messages
This section contains an alphabetical list of the status, error, and
warning messages that appear in the control panel display.
If
Auto Continue
is turned on in the printer driver or the SelecType,
some error messages are not displayed even though the problem
remains. Ordinarily, you should leave
Auto Continue
off.
The paper size setting is different from the size loaded in the
printer. Check to see if the correct size of paper is loaded in the
tray; then press the
Continue
button.
If you turn on
Size Ignore
in the SelecType Config menu or the
printer driver, this menu does not occur.
The paper type setting on the printer driver’s Basic Settings menu,
or in SelecType, is different from the type of paper loaded in the
printer. Make sure the correct type of paper is loaded in the
printer; then press the
Continue
button to clear the message.
The printer does not have sufficient memory to collate print jobs.
Only one set of copies will be printed. Reduce the contents of print
jobs or add more memory in your printer. Press the
Continue
button to clear the message.
Check Paper Size
Check Paper Type
Collate was disabled
