A SERVICE OF

logo

11-31
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 11 Performance Monitoring
Performance Monitoring for Optical Ports
Note For information about troubleshooting Linear Multiplex Section Protection switch counts, refer to the
Cisco ONS 15310-MA SDH Troubleshooting Guide. For information about creating circuits that perform
a switch, refer to the Cisco ONS 15310-MA SDH Procedure Guide.
4. Far-end high-order VC4 and VC4-Xc path PM parameters applies only to the STM1-4 card. Also, MRC-12 and
OC192/STM64-XFP based cards support far-end path PM parameters. All other optical cards do not support far-end
path PM parameters.
5. SDH path PM parameters do not increment unless IPPM is enabled. See the 11.2 Intermediate-Path Performance
Monitoring section.