Filter
Top Products
WD TV Live Hub Media Center
User Manual
SETUP AND ADVANCED FEATURES – 162
3. Press / to select System, then press OK.
4. Press / to select Device Registration, then press OK.
5. On the Register Product screen, press / to select First Name, then press
OK.
6. Use the navigation buttons to type in your first name using the on-screen
keyboard. Select Submit, then press OK.
7. Press / to select Last Name, then press OK.
8. Use the navigation buttons to type in your last name using the on-screen
keyboard. Select Submit, then press OK.
9. Press / to select Email, then press OK.
10.Use the navigation buttons to type in your email address using the on-
screen keyboard. Select Submit, then press OK.
11.On the Register Product screen, press to select OK, and then press OK.
WD LED Light Control
Use this menu to turn off the WD LED light (Always Off). If turned off, the WD LED
will only appear during start up then disappear after the device has booted up. The
default setting is Normal.
Device Reset
Use this menu to perform device reset options:
Reset All Settings Back to Factory Default – restores all media center system
preferences and playback settings to their default factory values. This may correct
problems caused by a failed firmware upgrade or faulty configuration settings.