Filter
Top Products
MM-012099-001, Rev. B
99
The voice coding technology embodied in this product is protected by intellectual
property rights including patent rights, copyrights, and trade secrets of Digital Voice
Systems, Inc. The user of this technology is explicitly prohibited from attempting to
de-compile, reverse engineer, or to disassemble the Object Code, or in any other way
convert the Object Code into a human-readable form.
10.17 SCANNING TRUNKED GROUPS
Groups that have been previously added to the scan list on a per system basis may be scanned. Each
system's group scan list is retained in memory when the radio is powered OFF or when the battery pack is
removed.
10.17.1 Turning Scan On and Off
1. Toggle Scan operation ON by pressing (P5450 model) or (P5470 model). The icon rotates
clockwise to indicate radio is scanning.
2. Toggle Scan operation OFF by again pressing
(P5450 model) or (P5470 model). The will
disappear.
• If the radio scans to a group other than the selected group then receives a call on the selected
group, the radio will switch to the selected group. However, if the “scanned-to” group is
programmed at a higher priority the radio will remain on the “scanned-to” group.
• The radio will continue scanning if a new group is selected when scan is ON.
3. Pressing the PTT button when scan is ON will cause the radio to transmit on the displayed group or to
the currently selected group (depending on programming).
10.17.2 Adding Groups to a Scan List
P5450 Model Radio
1. Scan must be OFF to add/delete groups to/from the scan list. If the Scan icon
is ON, press the
key to turn Scan OFF.
2. Select the desired group using the Voice Group Selection control knob and/or the
or keys. If
the selected group is currently on the list, pressing
will display on line three.
3. If the scan list status icon is blank (
), the group can be added to the scan list by pressing the key.
will be displayed on line three.
4. Press the
key a second time to set the group to Priority 2. A is displayed on line three.