Filter
Top Products
MM-012099-001, Rev. B
69
9.2.1 Radio Status Icons
Status Icons indicate the various operating characteristics of the radio. The icons show operating modes
and conditions and appear on the third line of the display (see Table 9-1).
Table 9-1: Status Icon De
scriptions
STATUS ICON DESCRIPTIONS
Steady – “Busy” transmitting or receiving. Appears in the 2nd position of the display.
Steady – during all radio transmissions. Appears in the 1
st
position of the display.
Steady – transmit at low power. Appears in the 5th position of the display.
If icon is not visible – transmit at high power
Steady – battery charge indicator (refer to Figure 9-6). Appears in the 12th position of the
display.
Flashing – Low battery indicator (refer to Figure 9-6).
Steady – Indicates the current channel is set up as an analog channel. Appears in the 7th
position of the display.
Steady – group or channel in scan list. Appears in the 10th position of the display.
Steady – priority 2 group or channel. Appears in the 10th position of the display.
Steady – priority 1 group or channel. Appears in the 10th position of the display.
Steady (rotates clockwise) – scan mode enabled. Appears in the 9th position of the display.
If icon is not visible – scan is disabled
Steady – Channel Guard enabled. Appears in the 4th position of the display.
If icon is not visible – Channel Guard is disabled
Figure 9-6: Battery Charge Icons (Full Cycle)
The battery icons (see Figure 9-6) indicate approximate level only
, based on battery voltage.