Filter
Top Products
MM23772, Rev. B
57
METHOD 2: (System and Scan model radios only) From keypad: If group selection is
programmed as the primary function of
and select a group by pressing
or to scroll through the group list. The display registers the new group
name on line two.
METHOD 3:
(System model radios only) Direct Access: Press
to enter the group select
mode. Press the numeric key mapped to the desired group. Press
. The radio
will move to the selected group.
METHOD 4:
(Select model radios only) If programmed for groups, press the
button to
change groups. The display registers the new group name on line two. I
f
programmed for channels, press the button to change the channel. The
display registers the new channel.
8.11 MODIFY SCAN LIST
8.11.1 System Model
1. Press to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from list.
4. Press
once to add as a normal group or channel.
5. Press
twice to add as a Priority 2 group.
6. Press
three times to add as a Priority 1 group.
7. Press
to re-start scanning.
8.11.2 Scan Model
1. Press to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from the list.
4. Press
once to add as a normal group or channel.
5. Press
twice to add as a Priority 2 group.
6. Press
three times to add as a Priority 1 group.
7. Press
to re-start scanning.