Filter
Top Products
MM23772, Rev. B
27
7.3 DISPLAY
The P7200 display is made up of 3 lines. Lines 1 and 2 contain twelve alpha-numeric character blocks
each. The 3
rd
line displays radio status icons. If programmed, the display backlighting will illuminate
upon power up or when operating radio controls. See the operation sections of this manual for specific
display characteristics.
Figure 7-2: Blank Radio Display
7.4 RADIO STATUS ICONS
Status Icons indicate the various operating characteristics of the radio. The icons show operating modes and
conditions and appear on the third line of the display (see
Table 7-2). The battery charge indicator illustrates
approximate level only, based on battery voltage.
Table 7-2: Status Icons Descriptions
Steady – Radio is data registered.
Steady – Stealth mode is enabled (all tones and display backlight is disabled,
voice is still heard).
Steady – Battery charge indicator
Flashing – Low battery indicator
VTAC Connection Indicator – Indicates the client is connected to a VTAC
Steady – Indicates Selective Call mode
Steady – Indicates received signal strength.