Filter
Top Products
64
activation message is sent by the system manager.
Each radio that receives and acknowledges the
regrouping instructions is successfully regrouped.
Pressing and holding the CLEAR/MONITOR
button for 2.5 seconds toggles the user into and out
of the dynamic regroup groupset. A double beep will
sound for entry or exit. The display will indicate
"REGRP_0x" where "x" is a digit of 1 to 8 indicating
the group when dynamic regroup has been enabled
by the user. If the radio is in dynamic regroup and
the user selects a group that has not been
regrouped, the display will show "NO ENTRY". The
radio will be prevented from transmitting and
receiving calls in this condition except for scanned
groups.
The mode of communication on a selected
talkgroup is determined by programming. If
the selected programmed talkgroup is
programmed for digital communication, the
regrouped talkgroup will be in digital mode; if
programmed for analog communication, the
regrouped talkgroup will be in analog mode.
EMERGENCY OPERATION
If the pre-programmed groupset on the currently
selected system contains an EMER/HOME group
and the radio is in dynamic regroup, the radio will
NOTE