Filter
Top Products
54
2. Press the PTT button to transmit.
turns on,
turns off and the channel access tone sounds.
Line one shows the called individual's ID
followed by the logical ID number of the unit
being called. The message
*INDV* displays on
line two. Proceed talking into the microphone.
Call Storage Lists
There are two lists available for call storage in the
LPE-200 radio, the calls received list (1 - 10) and the
personality list (1 - 99 as defined by the user). When
the individual call mode is entered by pressing #,
the calls received list is available. The user can
toggle to the personality list by selecting any index
other than 0 or toggle between the two lists by
pressing the # key. If wrap is enabled, the calls
received list wraps on itself and not into the other list.
The saved call list shows all ten storage
locations. If no calls have been received, the saved
call list will be empty and the pre-stored list will be
available upon entering the individual call mode.