Filter
Top Products
52
Pressing PTT will initiate an individual call to the
displayed logical ID. Turning the radio off and on will
clear this list.
Sending An Individual Call (Trunked Mode Only)
Pre-Stored Individual Calls
The following procedures describes how to
initiate and complete a pre-stored individual call.
System Model
1. To select a pre-stored individual phone number,
enter the individual call mode using the #
key.
turns on. Then scroll through the list of
stored numbers using the < or > key.
2. Press the PTT button; when the radio is clear to
transmit,
turns on, turns off and the channel
access tone sounds. Line one shows the called
individual's name if found in the list of stored
individuals or LID followed by the logical ID
number of the unit being called. The message
*INDV* displays on line two.