Filter
Top Products
40
4. Release PTT when the transmission is
complete.
5. To clear the emergency first press and hold the
CLEAR/MONITOR button. While continuing to
hold the CLEAR/MONITOR button, press the
EMERGENCY button. (This will work if the radio
is programmed to clear emergencies.)
SCANNING TRUNKED GROUPS
Groups which have been previously added to the
scan list on a per system basis may be scanned.
Each system's group scan list is retained in memory
when the radio is turned off or when the battery pack
is removed.
The following procedures outline scan operations
for trunked groups. See the conventional mode
operating procedures for specific procedures on
conventional channel scanning.
Turning Scan On and Off
1. Toggle scan operation on by pressing S
(SCAN Model) or 3 (SYSTEM Model).
icon
rotates clockwise to indicate radio is scanning.
2. Toggle scan operation off by again pressing
S (SCAN Model) or 3 (SYSTEM Model).
will disappear.
•
If the radio scans to a group other than the
selected group then receives a call on the