Filter
Top Products
22 TASCAM MP-VT1
On the SETUP screen, you can make various MP-VT1
settings, as well as initialize or format the unit. Press the
MENU key to open the MENU screen, and then select and
open the SETUP item.
The following settings related to how the MP-VT1
operates and its display behaves can be made on the
SETUP screen.
9 – Setup Menu Options
Use CUE/REV SPEED to determine how fast search occurs
when the ≤ and µ keys are pushed and held.
Setting choices: x2, x4, x8 (factory setting), x10
Use AUTO OFF to set how long until the unit automatically
turns OFF when powered by the internal battery. This
setting is the amount of time from when track playback
has stopped and the unit has last been used.
Setting choices: OFF (factory setting, the power must be
turned off manually), 3 min, 5 min, 10 min, 30 min
Use BACKLIGHT to set the time since the last operation
until the backlight automatically turns OFF when
powered by the internal battery.
Setting choices: OFF (backlight always on), 5 sec (factory
setting), 10 sec, 15 sec, 30 sec
Use CONTRAST to adjust the display contrast.
Setting choices: 1–20 (factory setting: 12)
Cue and review speed
Automatically turning off the backlight
Automatic power off
Display contrast
Use DIMMER to adjust the backlight brightness.
Setting choices: HIGH (factory setting), LOW, OFF (no
backlight)
Use INITIALIZE to restore the MP-VT1 to its factory
settings.
1 Select INITIALIZE and press the ENTER key to
highlight Exec.
2 Press the ENTER key again to open a confirmation
popup window.
3 Press the ENTER key again to initialize the unit.
Press the MENU key to cancel initialization.
Backlight brightness
Initializing the unit