Filter
Top Products
TASCAM MP-VT1 13
4 – Menus & Settings
Operation example
In this example, we change the fast forward and reverse
speed by using the SETUP menu CUE/REV SPEED item.
1 With the Home screen open, press the MENU key.
The MENU screen with the list of menus appears.
NOTE
As shown above, the ¶ at the bottom right of the
screen indicates that there are items not shown that
can be accessed by scrolling down. If the § appears
in the same area, there are items not shown that can
be accessed by scrolling up.
2 Turn the wheel to select the SETUP screen and press
the ENTER key to open the SETUP screen.
3 Turn the wheel to select CUE/REV SPEED and press the
ENTER key. The current setting is highlighted.
4 Turn the wheel to choose the desired value.
NOTE
§ and ¶ appear to the right of the setting value and
indicate whether the value can be raised or lowered.
For example, in the case of CUE/REV, there are five
possible settings: X2, X4, X6, X8 and X10.
If the lowest value (in this example, X2) is set, then
the § appears, showing that the value can be raised.
If the highest value (in this example, X10) is set,
then the ¶ appears, showing that the value can be
lowered.
If set at any other value, both § and ¶ appear
showing that the value can be raised or lowered.
5. Press the MENU key repeatedly to return to the
Home screen. Each time you press this key, you
will return to the previous level of operation.
NOTE
The METRONOME screen works in the same way as the
other Menus. (See the “Using the metronome”
chapter on page 19.)