Filter
Top Products
4
Installation Manual
CHAPTER 1
1. Introduction
Unpacking
Your TGM-100 should reach you in perfect con di tion. If
you do notice any shipping damage, please contact your
Sunfi re Dealer immediately.
Gently lift out the unit and remove all the packing mate-
rial and ac ces so ries. It is im por tant to save all the packing
ma te ri als and the box in case your TGM-100 ever needs to
be moved or returned for service.
Make sure that you keep your sales receipt. It is the only
way to establish the duration of your Limited Warranty and
it may come in useful for insurance pur pos es.
Please take a moment to fi ll out and mail the Sunfi re Cus-
tomer Response card. Also read the serial num ber located
on the rear panel, and record it here:
Serial #:
Purchased from:
Date:
Pre-Installation Information
For detailed safety instructions when installing and operat-
ing the TGM-100, either as Server or Client, please refer to
the User's Guide.
It is essential that you can control the TGM-100 once it is
connected and that you have access to the unit’s TV User
Interface at the same location as the control source. In
some installations, the TGM-100 may be in a different room
from the Digital Video display. Without proper planning of
the TGM-100 confi guration during installation, confi guration
may be problematic.
There are a number of options available in these circum-
stances. These include:
1. Temporarily connect an HDMI display directly to the
TGM-100’s Digital Video connector using short cables
and confi gure the TGM-100 using the remote control.
2. Ensure that the control system is properly confi gured
and the TGM-100 is controllable via IR from the room in
which the digital television is located.
DVD Region
DVDs are encoded differently in different parts of the world;
for example, a North American DVD drive can’t read a
European DVD. The drive’s DVD region code is set the fi rst
time a DVD is inserted into the disc player. Once the region
has been set, it cannot be changed.
Required Equipment
Make sure that the following equipment is available in order
to complete the installation:
• A Sunfi re TGM-100 and remote control.
• If installing a TGM-100C Client, you must have a
TGM-100 Server and remote control as well.
• A TGM-HDC or TGM-HD1 external storage device.
• A TV for the TGM-100 Server.
• A TV for any TGM-100C Clients installed in the system.
• A USB keyboard and mouse.
• An Ethernet Local Area Network (LAN).
• CDROM or USB Memory Device with application
installer.
• All required cables and connectors.