Filter
Top Products
18
Installation Manual
CHAPTER 2
eSATA Connections
The TGM-HD1 is a 1 Terabyte External Storage Device
that utilizes an eSATA cable to connect directly to the
TGM-100. The TGM-HD1 does NOT connect to the home
network previously described. To connect the TGM-HD1 to
the TGM-100:
1. The Raid Selection Switch is preset to 'safe 100'. If this
switch is set to something else, contact Sunfi re techni-
cal Support.
2. Plug the TGM-HD1 into the eSATA socket on the back
of the TGM-100 Server only. TGM-100 Clients only sup-
port external storage via a TGM-100 Server.
3. Set the Power Switch (Off Auto On) to the middle
'Auto' position for Automatic power control. This allows
the TGM-HD1 to power On and OFF when the TGM-
100 powers On and Off.
4. Turn on the TGM-100. It will automatically recognize the
TGM-HD1 as soon as both units are fully operational.
Note: Only one eSATA Storage Devive may be used in a
system. Multiple iSCSI devices may be used.
Note: It is possible to use an eSATA Storage Device in
conjuction with one or more iSCSI devices.
fast
jbod
big
Set to ‘safe 100’
Set to ‘auto’
Connect eSATA Cable
Connect Power Cord
safe 100
safe 33
safe 50