Filter
Top Products
30-GB
Labeling a disc during stop
1 Insert a disc.
When a disc is already inserted, make
sure the recorder is stopped.
2 Press EDIT/ENTER.
“ :Name” flashes in the display.
3 Press EDIT/ENTER again.
The disc is ready to be labeled.
4 Press . or > repeatedly to
select a letter and press N to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
5 Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press xSTOP or
TRACK MARK.
6 Press EDIT/ENTER.
The track or disc is labeled.
Labeling a track during
playback
1 Insert a disc and play the track you
want to label.
2 Press EDIT/ENTER.
“ :Name” flashes in the display
and the recorder plays the selected
track repeatedly.
3 Press EDIT/ENTER again.
The track is ready to be labeled.
4 Follow steps 4 to 6 of “Labeling a
disc during stop”.
Labeling a track or a disc
during recording
1 While recording, press EDIT/
ENTER.
“ :Name” flashes in the display.
2 To label a track, press EDIT/ENTER
again.
To label a disc, press . or >
repeatedly until “ :Name” flashes
in the display, then press EDIT/
ENTER.
The track or disc is ready to be
labeled.
3 Follow steps 4 to 6 of “Labeling a
disc during stop”.
To cancel labeling, press xSTOP or
TRACK MARK.
To relabel recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
press the EDIT/ENTER button.
Press To
X Switch between
capital letters, small
letters, and marks /
numbers.
./> Change the letter to
the one before / next
one.
EASY
SEARCH
+/–
Move the cursor to the
left or right.
DISPLAY Insert a blank space to
type in a new letter.
PLAY
MODE
Delete a letter and
move back all
following letters to the
left.
xSTOP Cancel labeling.
TRACK
MARK
Cancel labeling.