Filter
Top Products
16-GB
Recording with digital
(optical) input (optical cable
required)
Connect to a digital source using an
optical cable (not supplied) to make
digital recordings. Digital recording is
possible even from digital equipment with
different sampling rates, such as a DAT
deck or a BS tuner, using the built-in
sampling rate converter.
1 Slide REC MODE to STEREO.
2 Insert a recordable MD and press
zREC.
“REC” appears in the display, the
REC indicator lights up, and the
recording starts.
3 Play the source sound.
For other operations on recording, see
“Recording an MD right away!”
(page 8).
z
• When you record in monaural, you can record
twice as much as in stereo (page 19).
• When recording from digital media, track
marks in the original are copied automatically
to the MD.
Notes
• You can make a digital recording only from an
optical type output.
• When recording from a portable CD player,
play it on AC power and disable the anti-skip
function (such as ESP*).
• When recording from a portable CD player,
pause the CD player before doing the
recording procedure.
• Digital output may be disabled on some
portable CD players when the player is not run
on AC power.
• A track mark is added at the point where you
press the XPAUSE button again to resume
recording while pausing recording; thus the
remainder of the track will be counted as a
new track.
∗ Electronic Shock Protection
POC-15AB etc.
(not supplied)
POC-15B etc.
(not supplied)
to LINE IN
(OPTICAL)
Optical
plug
Optical
mini-
plug
CD player, MD
player, digital
amplifier, etc.
Portable CD
player, etc.
zREC
REC
indicator
REC MODE