Filter
Top Products
19-GB
Recording in monaural
for double the normal
recording time
For longer recordings, choose to record in
monaural. The recording time becomes
double the normal.
1 Slide REC MODE to MONO.
2 Insert a recordable MD and press
zREC.
For other operations on recording, see
“Recording an MD right away!”
(page 8)
To stop recording, press xSTOP.
Notes
• If you record a stereo source in monaural, the
sounds from left and right will be mixed.
• You may not be able to record in monaural if
the SYNCHRO REC switch is slid to ON. If
you are recording digital input, make sure to
slide the SYNCHRO REC switch to OFF
before you begin recording.
• The MDs recorded in monaural can be played
back only with an MD player/recorder that has
the monaural playing function.
• Sound recorded through digital (optical) input
can be monitored in stereo through
headphones/earphones, etc.
Setting the clock to
stamp the recorded
time
To stamp the date and time on the MD
when you record, you first need to set the
clock.
1 Light up the display by pressing
xSTOP, and then press CLOCK SET
at the button of the recorder.
Use a pointed object.
The digits of the year flash.
If you do not light up the display first,
you will not be able to set the time
even when you press CLOCK SET.
2 Change the current year by pressing
. or >.
To change the digits rapidly, keep
pressing . or >.
3 Press NPLAY to enter the year.
The digit of the month flashes.
4 Repeat step 2 and 3 to enter the
current month, date, hour, and
minute.
When you press NPLAY to enter
the minute, the clock starts operating.
zREC
REC MODE
NPLAY
./>
CLOCK SET
(bottom)
xSTOP
¢¢y 1m 1d