Filter
Top Products
Troubleshooting
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
159
159
Other
Symptom Cause/Remedy
The touch panel does not
work properly.
A screen protection sheet or privacy filter is not applied
properly.
If t
he sheet lies off the edge of the screen, or burrows its way
into the gap, reapply it. If you are using a sheet other than
Sony’s optional protection sheet, it may interfere with the
touch panel.
The HOLD switch is set to the HOLD position.
Slide t
he HOLD switch to the opposite position (
page
10).
There is no beep sound
when the player is
operated.
“Beep Settings” is set to “Off.”
Set “
Beep Settings” to “On” (
page 119).
The beep does not sound when the player is connected to the
optional cradle, or another device.
The player gets warm.
The player may become warm when the battery is being
charged and just after charging. The player also may get warm
when a large amount of data is transferred. This behavior is
normal and not cause for concern. Set the player aside for a
while to allow it to cool down.
The date and time have
been reset.
If you left the player for a while with the battery used up, the
date and time may be reset. This is not a malfunction. Charge
the battery until appears on the screen (
page 24), and
set the date and time again (
page 26).
Noise is generated when
plugging or unplugging
the headphones.
Take off the headphones when plugging or unplugging the
headphones. If you plug or unplug the headphones during
playing song or using Noise Canceling function, you may hear
a noise from the headphones. This is not a malfunction.
Table of
Contents
Index