Filter
Top Products
73
73
About the Menu Function
Index
Table of
Contents
ModelName: ICD‑TX50
PartNumber: 4‑300‑042‑11(1)
Sub menus Menu items Settings
(* : Initial setting)
See
page
Recording Settings Mic Sensitivity Sets the microphone sensitivity.
High
:
To record a sound far away from
the IC recorder or a low sound,
such as recording in a spacious
room.
Medium
*
:
To record the sound of a normal
conversation or meeting, such as
recording in a meeting space or
during interview.
Low
:
To record dictation with a
microphone in front of your
mouth, a sound near the IC
recorder, or a loud sound.
—
LCF(Low Cut) Sets the LCF (Low Cut Filter) function
to cut a low frequency to reduce the
noise from a projector, or the roaring
noise from wind; therefore you can
record a file more clearly.
ON*:
Th
e LCF function is activated.
OFF: The LCF function is canceled.
—
VOR Sets the VOR (Voice Operated
Recording) function.
O
N:
Recording starts when the IC
recorder detects sound that
exceeds a specified level and
pauses when the detected sound
falls below a specified level. The
VOR function is activated when
REC/P
AUSE is pressed.
OFF*: Th
e VOR function does not
work.
43
Playback Settings DPC(Speed Control) Sets the DPC (Digital Pitch Control)
function. You can adjust the playback
speed in a range from 0.50 times to
2.00 times normal. The file is played
back in natural tones by means of a
digital processing function.
ON(x n.nn):
A file is played back at the
specified speed (x n.nn: n=0 to
9) using the DPC function.
OFF*:
The DPC function does not
work.
Set Speed:
Specify the playback speed from
x0.5 to x2.00. (x0.70*)
48
Continued