Filter
Top Products
ModelName: ICD‑TX50
PartNumber: 4‑300‑042‑11(1)
111
111
Troubleshooting
Index
Table of
Contents
The IC recorder cannot be properly connected.
Ch
eck that the installation of the software has been successful. Also check the
connection as follows:
When using an external USB hub, use the supplied USB connecting cable to
connect the IC recorder to your computer.
Disconnect and then connect the IC recorder.
Connect the IC recorder to another USB port.
Y
o
ur computer may be in the system standby/hibernate mode.
Do n
ot let your computer enter into the system standby/hibernate mode while
being connected to the IC recorder.
Sav
e a backup copy of all of the data stored on the built‑in memory or the microSD
card, and then format the built‑in memory or the microSD card using the
formatting function in the menu (
p.
78).
Playback
sound from the computer is low./No sound is emitted from the
computer.
N
o s
ound board is installed.
No s
peaker is built‑in or connected to the computer.
The v
olume of the sound is turned down.
Tur
n up the volume on the computer. (Refer to the instruction manual of the
computer.)
The v
olume of WAV files can be changed and saved using the “Increase Volume”
feature of the Microsoft Sound Recorder.
Stored files cannot be played back or edited.
Yo
u cannot play back files whose file format the Sound Organizer software does not
support. Depending on the file format, you cannot use part of editorial features of
the software. Refer to the help files of the Sound Organizer software.
The
counter or slider moves incorrectly, or noise is heard.
This h
appens when you play back files that you divided.
St
ore a file on your computer first
*
, and then add it to the IC recorder. (
*
Select
the saving file format that suits the IC recorder you use.)
Op
eration is slow when there are many files.
Wh
en the total number of files increases, the operation becomes slower, regardless
of the length of the recording time.
Display does not work during saving, adding, or deleting files.
It t
akes a longer time to copy or delete long files.
Wa
it until the copying is finished. After completing operations, the display works
normally.
The
software ‘hangs’ when the Sound Organizer software starts up.
Do n
ot disconnect the connector of the IC recorder while the computer is
communicating with the IC recorder. Otherwise the computer operations become
unstable or the data inside the IC recorder may be damaged.
Ther
e may be conflict between the software and other driver or application.
−
−
−