Filter
Top Products
ICD-SX700/SX800 4-127-580-11(1)
53
GB
Recording
5 Press (stop) to exit the menu
mode.
6 Connect other equipment to the IC
recorder when the IC recorder is in
the stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment
to the
(microphone) jack of the IC
recorder using an audio connecting
cable*.
“SELECT INPUT” appears in the display
window.
7 Press or to select “AUDIO
IN,” then press .
8 Press (record/pause) to start
recording.
The built-in microphones are
automatically cut o and the sound
from the connected equipment is
recorded.
9 Start playback on the component
connected to the IC recorder.
* Optional audio connecting cables (not
supplied)
To the IC
recorder
To the other
equipment
RK-G139 Stereo
mini-plug
Mini-plug
(monaural)
RK-G136 Stereo
mini-plug
Stereo
mini-plug
Notes
If the input level is not strong enough,
connect the headphone jack (minijack,
stereo) of other equipment to the
(microphone) jack of the IC recorder in
step 6 and adjust the volume level on the
equipment connected to the IC recorder.
If “SELECT INPUT” is not displayed, set it in the
menu (page
89).
Your dealer may not handle some of the
above listed optional accessories. Please ask
the dealer for detailed information.