Filter
Top Products
ICD-SX700/SX800 4-127-580-11(1)
41
GB
Recording
Cutting out Low
Frequency – the LCF
Function
,
/MENU
When you set the LCF (Low Cut Filter)
function to “ON” in the stop or recording
mode, you cut out a frequency of lower
than 200 Hz to reduce the roaring noise
from wind, etc., this helps to record a
sound source more clearly.
The LCF function is set to “OFF” when you
purchase the IC recorder.
1 Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
2 Press or to select “LCF
(LOW CUT),” then press .
3 Press or to select “ON,”
then press .
4 Press (stop) to exit the menu
mode.
To cancel the LCF function
Set “LCF (LOW CUT)” to “OFF” in step 3.