Filter
Top Products
ICD-SX700/SX800 4-127-580-11(1)
52
GB
8 Press (record/pause) to start
recording.
“ ” ashes and the IC recorder
enters the recording pause mode.
9 Start playback on the component
connected to the IC recorder.
“ ” appears on the display and
synchronized recording starts.
The synchronized recording pauses
when no sound is detected for more
than 2 seconds, and “
” ashes.
The IC recorder starts recording again as
a new message when sound is detected.
Notes
During synchronized recording, you cannot
divide a recording message (page
43), you
cannot pause recording (page
29), you
cannot record with the VOR function or
you cannot record with the pre-recording
function.
Depending on the equipment connected to
the IC recorder, the synchronized recording
function may not operate properly due to a
difference in the audio input level.
To record without using
the synchronized recording
function
1 Press and hold /MENU to enter
the menu mode.
The menu mode window will be
displayed.
2 Press or to select “DETAIL
MENU,” then press .
3 Press or to select “SYNC
REC,” then press .
4 Press or to select “OFF,”
then press .