Filter
Top Products
84
GB
Detail
Menu
Date&Time
Sets the clock to use the alarm function or record the date
and time.
1Press and hold
DISP/MENU to enter the menu mode.
Select “Detail Menu,” then “Date&Time.”
2Press –
. or >+ to select “Auto(Synchronizing)” or
“Manual,” and then press
N PLAY/STOP•ENTER.
Auto(Synchronizing)*:
When the IC recorder is connected to a computer that is
running the Sound Organizer software, the clock will
be automatically adjusted according to that computer.
Manual:
Sets the clock by setting year, month, day, hour, and
minute in sequence.
3When you select “Manual,” press –
. or >+ to set
the year, month, day, hour, and minute in sequence, and
then press
N PLAY/STOP•ENTER.
Select the last two digits of the year when you set the
year. When you set the minute, the “Executing...”
animation is displayed.
15
Time Display
Sets the clock display.
12-Hour*:
12:00AM = midnight, 12:00PM = noon
24-Hour:
0:00 = midnight, 12:00 = noon
–
Beep
Sets whether a beep will be heard or not.
ON*:
A beep will sound to indicate that an operation has been
accepted or an error has occurred.
OFF:
No beep sound will be heard.
PNote
The alarm sounds even if you set “Beep” to “OFF” in the
menu.
–
Menu items Settings (*: Initial setting) See page