Filter
Top Products
112
GB
It takes a long time for the IC
recorder to start.
• If the IC recorder is required to process a large amount of data, it
may take longer for the IC recorder to start. This is not a
malfunction of the IC recorder. Wait until the start-up display
disappears.
The IC recorder does not
operate.
• You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 85).
The IC recorder does not
operate, even if you press
any button.
• The batteries are weak (page 13).
• The power to the IC recorder is off. Slide the
HOLD•POWER
ON/OFF
switch in the direction of “POWER ON/OFF” for
more than 1 second (page 14).
• The HOLD function is activated. Slide the
HOLD•POWER ON/
OFF switch in the center direction (page 11).
No sound comes from the
speaker.
• The volume is turned down completely (page 24).
• Headphones are plugged in (page 49).
Sound comes from only one
channel.
• When audio output of an external device connected to the IC
recorder is monaural and the recording mode is set to
“192kbps(MONO)” (SHQ) or “128kbps(MONO)” (HQ), sounds
are recorded only in one channel. In this case, set the recording
mode to “48kbps(MONO)” (SP) or “8kbps(MONO)” (LP) in the
menu (page 81).
Sound comes from the
speaker even when a pair of
headphones is plugged in.
• If you plug in a pair of headphones (not supplied) not securely
during playback, the sound may come from the speaker. Unplug
the headphones, and then insert them securely.
The operation indicator does
not light.
• “LED” is set to “OFF.” Display the menu and set “LED” to “ON”
(page 83).
“Memory Full” is displayed
and you cannot start
recording.
• The memory is full. Erase some of the files (page 29) or erase all
the files after you store them on the other memory media or on
your computer.
Symptom Remedy