Filter
Top Products
23
Sony D-V500 (E)_3-856-309-11(1) [ ]
Troubleshooting
Should any problem persist after you
have checked the following, consult
your nearest Sony dealer.
The disc does not play or “no
dlSC” appears on the display
though a disc is placed in the
unit.
b The disc is dirty or defective.
b Insert the disc with the label side
up.
b Moisture condensation has
occurred.
Leave the unit unused for several
hours until the moisture
evaporates.
b The lens is dirty.
b Close the lid of the unit and the
battery compartment firmly.
b Make sure the rechargeable
battery is inserted correctly.
b Connect the AC power adaptor to
a wall outlet securely.
No sound, or noise is heard.
b Plugs are not connected firmly.
b Plugs are dirty. Clean the plugs
with a dry soft cloth periodically.
Sound seems to lose the stereo
effect and becomes monaural.
b Press ST/L/R on the remote
repeatedly until the stereo effect is
restored.
“Hold” appears on the display
when you press a button.
b The button operation is restricted.
Slide HOLD to the left.
No picture appears on the TV
screen.
b Make sure the TV is turned on.
b Make sure you select the correct
video input on the TV.
b Connect the video connecting
cord correctly.
b An audio CD is being played.
b You have connected the AV
monitor cord while playing an
audio CD. Connect the AV
monitor cord before turning the
power on.
b Close the lid of the player and the
battery compartment firmly.
b Make sure the following mark is
on the disc.
b You may not play back some
illegally duplicated discs though
they have the above mark printed.
In this case, consult the shops
where you bought the discs.
Picture is distorted.
b When you pause or use search,
picture is distorted. This is not a
malfunction.
b The disc is dirty or defective.
b The color system you have
selected for this player is not the
same as the one the disc is
recorded with.
The remote does not function.
b You can turn on the player by
pressing SELECT ( on the
remote within about 10 minutes
after you turn it off. If 10 minutes
have already passed, press ( on
the player to turn it on.
b Remove any obstacles between
the remote and the remote sensor.
b Replace all the batteries in the
remote with new ones if they are
weak.