Filter
Top Products
E-14
EN
Advanced CD or MP3/WMA disc playback (continued)
■ Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold the PLAY MODE button on the remote
control until “Random” appears. Press the
/ (CD / )
button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
disappear.
Notes:
● If you press the
button during random play, you
can move to the track selected next by the random
operation. On the other hand, the
button does not
allow you to move to the previous track. The beginning
of the track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
■ Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1 While in the stop mode, press the MEMORY button on
the remote control to enter the programming save mode.
2 Press the or button on the remote control to
select the desired track.
Selected track number
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be
cleared by pressing the CLEAR button.
5 Press the / (CD / ) button to start playback.
■ Programmed play (MP3/WMA)
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
2 Press the PRESET ( or ) button on the remote
control to select the desired folder.
Then press the or button on the remote control
to select the desired tracks.
3 Press the MEMORY button to save the folder and
track number.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5 Press the / (CD / ) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the
(CD )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
Notes:
● When the disc compartment is opened, the programme
is automatically cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.