Filter
Top Products
E-9
■ Pairing with other Bluetooth source devices
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the BLUETOOTH
/
button (remote control)
to select Bluetooth function. (PAIRING indicator
blinks.)
3 Press and hold the PAIRING button for 3 seconds
or more.
PAIRING indicator blinks quickly. The unit is now in
pairing mode and is ready to be paired with other
Bluetooth source device.
4 Perform pairing procedure on the source device to
detect this unit. “SHARP DK-KP85” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual
for details).
Notes:
● Place the devices to be paired within 1 meter (3
feet) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
5 Select “SHARP DK-KP85” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 Pairing indicator (blue) will stop blinking once the
unit is successfully paired with the source device.
(Pairing information is now memorised in the unit.)
Some audio source devices may connect with the
unit automatically after pairing is completed, oth-
erwise follow the instructions in the source device
operating manual to start connection.
7 Press the play button on main unit, remote control or
source device to start Bluetooth connection.
Notes:
● If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.
● To pair with other devices, repeat steps 1 - 5 for each
device.
● Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
● When Bluetooth device is turned off, “Disconnected” is
displayed briey. Pairing LED turns off for a while and
then will start blinking again.
■ Listening to the sound
Check that:
● The source device Bluetooth functionality is ON.
● Pairing of this unit and the source device is completed.
● Unit is in connected mode (pairing indicator (BLUE) lights
up.)
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the FUNCTION button to select Bluetooth func-
tion.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press play button (on main unit, remote control or
source device).
Notes:
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
Notes:
● You need to make the Bluetooth connection again if:
- the source device is not turned on, or its Bluetooth func-
tionality is off or is in sleep mode.
● During Bluetooth function, if the Bluetooth connected de-
vice and the one connected to the AUDIO IN are played
simultaneously, only the Bluetooth sound can be heard.
■ To finish listening
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Listening to Bluetooth enabled devices (continued)