Filter
Top Products
Safety Handling
To comply with applicable safety, emission, and thermal requirements, install all drives and empty drive
trays according to the instructions in Hard Drive Maintenance.
Permanently unplug the unit if you think that it has become damaged in any way.
You must shut down and disconnect power from the Personal Cloud 2-Bay before maintenance or physical
troubleshooting is performed on the device.
Shut down and unplug the unit before moving it.
Safety
Power Supply
The Personal Cloud 2-Bay must only be operated from a power supply input voltage range of 100 - 240 VAC,
50 to 60 Hz.
The drive’s power supply is not serviceable or replaceable. If Seagate technical support has determined that
the power supply is faulty or has failed and the unit is under warranty, return the Personal Cloud 2-Bay to
Seagate per the instructions provided by the Seagate technician.
Environment
Make sure that the electrical connection to the power cord is grounded.
Provide a suitable power source with electrical overload protection to meet the requirements of the
technical specification.
Never expose your device to rain, use it near water, or use it in damp or wet conditions. Never place
objects containing liquids on the enclosure, because liquid could spill into its openings. Doing so increases
the risk of electrical shock, short-circuiting, fire, or personal injury.
Always unplug the device from the electrical outlet if there is a risk of lightning or if it will be unused for an
extended period of time.
Do not use the Personal Cloud 2-Bay as a shelf to support any other object.
Personal Cloud 2-Bay Placement
Place your Personal Cloud 2-Bay on a surface that is capable of supporting its weight, including the hard
45Seagate Personal Cloud 2-Bay
5/13/15